EGW Swedish Mauser Small Ring 3-Hole Picatinny Rail 0 MOA
Quick Check: Small Ring Swedish Mauser
Action Type: Small Ring Military Swedish Mauser
Receiver Style: Stripper Clip Hump
Mounting Pattern: 3-Hole
Rail Type: One Piece Picatinny
MOA: 0 MOA
Center Spread: 4.275"
Material: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Type II Anodized
Overall Length: 6.670"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Ambidextrous: Yes
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4" Screws and T-10 Bit Included
SKU: 47030
GTIN: 841370106875
IMPORTANT: THIS IS THE SMALL RING SWEDISH MAUSER VERSION
This rail is designed for compatible Small Ring Military Swedish Mauser actions with the stripper clip hump. It is not the same rail as our Large Ring Military Mauser 98 mounts. Verify both your receiver type and the published 4.275" center spread before ordering.
Product Overview
The EGW Swedish Mauser Small Ring 3-Hole Picatinny Rail provides a modern one-piece optics mounting platform for compatible Small Ring Military Swedish Mauser rifles.
This rail is designed around the Small Ring Swedish Mauser receiver with the stripper clip hump and uses the 3-hole mounting configuration associated with this application.
Machined from domestic 6061 T6 extruded aluminum, the rail provides a continuous Picatinny mounting surface for flexible scope-ring positioning while keeping weight to approximately 2 ounces.
This version features 0 MOA of built-in elevation and a published 4.275" center spread.
Technical Specifications
- SKU: 47030
- Action: Small Ring Military Swedish Mauser
- Model Family: Swedish Mauser 3-Hole w/ Hump (96, 94, 38, 41)
- Receiver Style: Stripper Clip Hump
- Mounting Pattern: 3-Hole
- Rail Type: One Piece Picatinny
- Mount Series: Standard
- MOA: 0 MOA
- Center Spread: 4.275"
- Machined From: Domestic 6061 T6 Extruded Aluminum
- Finish: Matte Black Type II Anodized
- Overall Length: 6.670"
- Height: .4" (Top of Receiver to Top of Picatinny)
- Weight: 2 oz.
- Quick Disconnect Ring Compatible: No
- Ambidextrous: Yes
- Torque Specs: 20 in/lbs
- Mounting Hardware: #6-48 X 1/4" Screws and T-10 Bit Included
- GTIN: 841370106875
Small Ring Swedish Mauser Application
This rail is specifically intended for the Small Ring Military Swedish Mauser receiver configuration.
The Swedish Mauser family differs from the Large Ring Mauser 98 actions used by many other military and commercial rifles. Selecting the correct receiver family is essential when choosing a Mauser rail.
The model family associated with this rail includes the Swedish Mauser 96, 94, 38, and 41 configurations with the appropriate receiver profile and mounting pattern.
DO NOT CONFUSE THIS WITH A LARGE RING MAUSER 98 RAIL
This rail is for the Small Ring Swedish Mauser. Our Large Ring Military and Large Ring Commercial Mauser rails are different products designed around different receiver configurations.
Small Ring or Large Ring Mauser?
Before ordering any Mauser rail, determine whether your rifle uses a Small Ring or Large Ring action. This is particularly important on older military Mausers because similar receiver shapes can make identification confusing at first glance.
Use the comparison image below as a visual reference. For more information about receiver measurements, military versus commercial actions, and common Mauser variations, read our complete Mauser identification guide.
Small Ring vs. Large Ring Mauser Action Comparison
Not Sure Which Mauser Action You Have?
Mauser actions were manufactured in many countries and configurations. Our guide explains how to distinguish Small Ring and Large Ring actions and also covers common differences between military and commercial Mauser receivers.
Read Our Large Ring vs. Small Ring Mauser Guide
VERIFY THE RECEIVER, NOT JUST THE MODEL NAME
Confirm that your rifle has the correct Small Ring Swedish Mauser receiver profile, stripper clip hump, and compatible 3-hole mounting configuration. Older military rifles may also have been drilled or modified previously.
4.275" Center Spread
This drilled Swedish Mauser rail uses a published 4.275" center spread.
We recommend measuring the mounting-hole spacing in your receiver before ordering to confirm that it matches the published dimensions.
MEASURE BEFORE ORDERING
Confirm that your receiver matches the correct Swedish Mauser configuration and the published 4.275" center spread. Do not assume compatibility solely from the rifle's age, military origin, or Mauser designation.
One-Piece Picatinny Rail
Picatinny cross slots run the full length of the rail, giving you flexibility when positioning scope rings and establishing proper eye relief.
The center channel reduces overall mass while maintaining a continuous one-piece optics mounting platform.
In many applications, the center channel may also allow continued use of factory iron sights.
Domestic 6061 T6 Aluminum
We machine this rail from domestic 6061 T6 extruded aluminum.
After machining, the rail is tumbled, sandblasted, and Type II anodized with a matte black finish for long-lasting durability.
0 MOA Configuration
This version has 0 MOA of built-in elevation and is intended for applications where additional elevation from the rail is not required.
0 MOA VS. 20 MOA
0 MOA: Recommended for shooting approximately 0-500 yards.
20 MOA: Recommended for shooting approximately 500-1000 yards where additional scope elevation may be beneficial.
Installation
Before installation, confirm that your rifle has the correct Small Ring Swedish Mauser receiver, stripper clip hump, compatible 3-hole mounting pattern, and 4.275" center spread.
We recommend tightening the mounting screws to 20 in-lbs and applying a small amount of blue threadlocker.
#6-48 X 1/4" mounting screws and a T-10 bit are included.
Minor fitment may be required due to manufacturing tolerances and the wide variety of military Mauser receivers and previously modified rifles.
VERIFY FITMENT BEFORE INSTALLATION
Do not force the rail or mounting screws onto a receiver that does not match the published dimensions. Military rifles may have been modified, drilled, or reworked over their service life. If you are unsure of your receiver configuration or mounting pattern, have the rifle inspected by a qualified gunsmith.
Made in the USA
The rail and included mounting accessories are made in the USA.
Frequently Asked Questions
What Mauser does this rail fit?
This rail is designed for compatible Small Ring Military Swedish Mauser actions with the stripper clip hump and appropriate 3-hole mounting pattern.
Which Swedish Mauser models are associated with this rail?
The product application is listed for the Swedish Mauser 96, 94, 38, and 41 family with the appropriate Small Ring receiver and mounting configuration.
Is this a Large Ring Mauser 98 rail?
No. This rail is specifically for the Small Ring Military Swedish Mauser.
What is the center spread?
The published center spread is 4.275".
Does every Swedish Mauser fit this rail?
Do not assume fitment based only on the Swedish Mauser name. Verify the Small Ring receiver configuration, stripper clip hump, mounting pattern, and published hole spacing before ordering.
How can I tell whether I have a Small Ring or Large Ring Mauser?
Use the comparison image above and read our Large Ring vs. Small Ring Mauser Actions guide for additional identification information.
Is this the 0 MOA version?
Yes. This rail has 0 MOA of built-in elevation.
What material is the rail made from?
The rail is machined from domestic 6061 T6 extruded aluminum.
What torque should I use?
We recommend 20 in-lbs on the mounting screws with a small amount of blue threadlocker.
A Picatinny Rail for the Small Ring Military Swedish Mauser
For compatible Small Ring Swedish Mausers with the stripper clip hump and 3-hole mounting configuration, this 0 MOA rail provides a lightweight one-piece Picatinny platform for modern optics.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
