- Slide Shoulder Cutter 1/2" DiameterDo you need to install a reverse plug in a 1911 slide that has a shoulder at the rear of the spring plug tunnel? This tool allows you to remove that shoulder so you don't have to use a dremel. Our ... 70730
$60.00 - Para Barrel Ramp CutterUse this cutter to machine the frame to install Para and Clark ramped barrels. This tool has a .360" diameter with a 3/8" shank and is made from carbide.Recommended cutting speed: 500 RPM ... 70770
$30.00 - Reverse Plug Cutter HSSThe standard cutter is made from HSS (High Speed Steel) with a built-in pilot. The Carbide cutter has a live pilot.Instructions available here. Warning: This product may be alloyed with trace ... 70760
$75.00 - Reverse Plug Cutter Live Pilot CarbideThe standard cutter is made from HSS (High Speed Steel) with a built-in pilot. The Carbide cutter has a live pilot.Instructions available here. Warning: This product may be alloyed with trace ... 70750
$100.00 - Barrel Bed CutterUse our barrel bed cutter to lower the barrel bed to give proper clearance between the barrel and the inside of the slide. This tool is made from micrograin carbide with a 5/8" (.625") diameter ... 70740
$50.00 - Double End Carb Dove Cutter .33 x 60 65This tool is machined from solid carbide with a 3/8" shank. The cutters are .330" with one end at 60 degrees and the other at 65 degrees. This will not cut a Novak rear sight. It is only ... 70720
$85.00 - Carbide Cutters 60 DegreeThese cutters are for use with our Slitting Saw Mandrils, in conjunction with our gunsmith plate. The tool is domestically produced and made from micrograin carbide which gives long life and ... 70712
$67.00 - Carbide Cutter 15 DegreeThese cutters are for use with our Slitting Saw Mandrils, in conjunction with our gunsmith plate. The tool is domestically produced and made from micrograin carbide which gives long life and ... 70711
$54.00 - Carbide Cutter 0 DegreeSpecificationsThickness: 0.0625"Inner Diameter: 0.500" These cutters are for use with our Slitting Saw Mandrils, in conjunction with our gunsmith plate. The tool is domestically produced and made ... 70710
$50.00 - 6" Wilson/Nowlin Barrel Ramp CutterThis is an M42 cobalt cutter used to cut frames for Wilson or Nowlin-style barrels. It can also be used to clean up the vertical impact surface on a non-ramped barrel 45. Warning: This product ... 70700
$75.00