Our Remington 788 Standard Action and Long Action mounts are made specific to the guns.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our standard action mount is 3.00". The middle spread on our long action mount is 3.29".

Please review the below caliber chart to assure that you order the correct mount:

EGW Remington 788 Long Action Picatinny Rail 0 MOA

This mount fits:
Remington 788 Long Actions in the following calibers:

• .308
• .243
• 6mm
• 7mm08

This mount doesnt fit:

• .222
• .223
• .22-250
• .30-30
• .44 Magnum

Specifications:

• Rail Type: One Piece Picatinny
• Machined From: Domestic 6061 T6 Extruded Aluminum
• Finish: Matte Black Anodizing
• Center Spread: 3.296"
• Overall Length: 6.276"
• Height: .4" (Top of Receiver to Top of Picatinny)
• Weight: 2 oz.
• Quick Disconnect Ring Compatible: No
• Ambidextrous: Yes
• Torque Specs: 20 in/lbs
• Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included

This mount comes standard with a bevel on both sides making it ambidextrous.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.