EGW Mauser 98 Large Ring 3-Hole Picatinny Rail 0 MOA - Military

Product Overview

The EGW Mauser 98 Large Ring Military 3-Hole Picatinny Rail provides a modern one-piece optics mounting platform for compatible military Mauser 98 actions.

This version is specifically designed around the military Mauser receiver with the stripper clip hump and uses the 3-hole mounting configuration associated with this rail.

The rail is machined from domestic 6061 T6 extruded aluminum and features a full-length Picatinny mounting surface for flexible scope-ring placement. This 0 MOA version uses a published 4.275" center spread.

Military Mauser rifles have been manufactured and modified in many configurations over the years, so receiver identification and actual hole-spacing measurements should both be used when determining compatibility.

Military vs. Commercial Mauser 98 Actions

This rail is designed for the military Large Ring Mauser 98 configuration, not the commercial Large Ring mounting pattern used by rifles such as many Interarms, Zastava, Parker Hale, and similar commercial actions.

One of the key identifying features for this rail is the stripper clip hump found on the military-style receiver.

Do not select a Mauser rail based only on the words "Mauser 98" or "Large Ring." The military and commercial configurations can use different mounting patterns.

Large Ring or Small Ring Mauser?

Military versus commercial is not the only distinction to consider. You should also verify whether your Mauser uses a Large Ring or Small Ring action.

Use the image below as a visual reference. For more detailed information about Large Ring vs. Small Ring receivers, military and commercial actions, measurements, and common Mauser variations, read our complete Mauser identification guide.

Small Ring vs. Large Ring Mauser Action Comparison

4.275" Center Spread

This rail uses a published 4.275" center spread.

We strongly recommend measuring the mounting-hole spacing in your receiver before ordering. Military surplus rifles may have been drilled or modified previously, so the model or action family alone should not be used to confirm compatibility.

This Rail Does Not Fit the Mauser 3000 L

This Mauser 98 scope rail does not fit the Mauser 3000 L.

If you are unsure which Mauser receiver you have, compare your receiver to the identification information above and verify the mounting-hole dimensions before ordering.

One-Piece Picatinny Rail

Picatinny cross slots run the full length of the rail, giving you flexibility when positioning scope rings and establishing proper eye relief.

The center channel reduces overall mass while maintaining a continuous one-piece mounting platform across the receiver.

In many applications, the center channel may also allow continued use of the rifle's factory iron sights.

Domestic 6061 T6 Aluminum

We machine this rail from domestic 6061 T6 extruded aluminum in our shop.

After machining, the rail is tumbled, sandblasted, and Type II anodized with a matte black finish for long-lasting durability.

0 MOA Configuration

This version has 0 MOA of built-in elevation and is intended for applications where additional elevation from the rail is not required.

Installation

Before installation, confirm that your rifle has the correct Large Ring Military Mauser receiver, stripper clip hump, 3-hole mounting pattern, and 4.275" center spread.

We recommend tightening the mounting screws to 20 in-lbs and applying a small amount of blue threadlocker.

#6-48 X 1/4" mounting screws and a T-10 bit are included.

Minor fitment may be required due to manufacturing tolerances and the wide variety of Mauser receivers and previously modified military rifles.

Frequently Asked Questions

What Mauser does this rail fit?
This rail is designed for compatible Large Ring Military Mauser 98 actions with the stripper clip hump and appropriate 3-hole mounting pattern.

What is the stripper clip hump?
It is the raised receiver feature associated with the military Mauser configuration this rail is designed around. It is one of the important differences between this military rail and our commercial Large Ring Mauser rails.

Is this the commercial Mauser 98 rail?
No. This is the military 3-hole Large Ring version. The commercial Large Ring Mauser rails use a different configuration.

What is the center spread?
The published center spread is 4.275".

Does every military Mauser 98 fit this rail?
No. Mauser rifles have been manufactured and modified in many configurations. Confirm the Large Ring receiver, stripper clip hump, 3-hole pattern, and published mounting dimensions before ordering.

Will this fit a Mauser 3000 L?
No. This rail does not fit the Mauser 3000 L.

Is this a Large Ring or Small Ring rail?
This rail is for the Large Ring Military Mauser 98 configuration.

How can I identify whether I have a Large Ring or Small Ring Mauser?
Use the comparison image above and read our Large Ring vs. Small Ring Mauser Actions guide for additional identification information.

Is this the 0 MOA version?
Yes. This particular rail has 0 MOA of built-in elevation.

What material is it made from?
The rail is machined from domestic 6061 T6 extruded aluminum.

What torque should I use?
We recommend 20 in-lbs on the mounting screws with a small amount of blue threadlocker.