EGW HD Oversized 1911 Ejector - .38 Super, 9mm, .40 S&W and 10mm - Blued
Quick Check:
Fits: 1911 pistols with compatible ejector geometry
Component: Ejector
Application:.38 Super, 9mm, .40 S&W and 10mm
Material: Heat-treated carbon steel
Finish: Blued
Installation: Professional gunsmith fitting required
SKU: 10019
Made By: Evolution Gun Works
GUNSMITH-FIT EJECTOR
This part is intentionally oversized so a qualified gunsmith can fit it to an individual 1911. It is not intended as a universal drop-in replacement.
Product Overview
The EGW HD Oversized 1911 Ejector for .38 Super, 9mm, .40 S&W and 10mm is designed for pistolsmiths and builders who need additional material when fitting an ejector to a compatible 1911.
Rather than attempting to make one finished ejector fit every frame and slide, the oversized geometry provides stock for a qualified gunsmith to establish the required fit and working surfaces.
This heavy-duty model uses heat-treated carbon steel and a blued finish, with oversized areas for custom fitting.
Technical Specifications
- SKU: 10019
- Platform: 1911
- Calibers:.38 Super, 9mm, .40 S&W and 10mm
- Component: HD Oversized ejector
- Material: Heat-treated carbon steel
- Finish: Blued
- Installation: Custom gunsmith fitting
Oversized Where Fitting Matters
The HD oversized design intentionally provides additional material for precise fitting at the ejector and frame interface. This is intended for professional fitting rather than universal interchangeability.
Additional material can be useful when replacing a worn component or accommodating dimensional differences in a custom build.
Designed for 1911 Ejection-System Work
This model is offered for .38 Super, 9mm, .40 S&W and 10mm. Because the extractor, ejector, slide, and cartridge dimensions work as a system, a qualified pistolsmith should confirm the finished part is correct for the application.
The ejector helps redirect an extracted fired case out of the pistol. Correct function depends on more than the presence of a new ejector.
Carbon Steel and Blued Finish
This HD oversized ejector is machined from heat-treated carbon steel with a blued finish, matching the traditional dark appearance of many 1911 internal components.
Professional fitment remains essential because firearm and aftermarket-part tolerances vary.
GUNSMITH-FIT VS DROP-IN
This hd oversized ejector is intentionally supplied with extra material. It should not be represented as a finished drop-in part.
Why Choose This EGW Part?
- ✔ Heavy-duty oversized 1911 ejector profile
- ✔ Additional material for professional fitting
- ✔ Designed around .38 Super, 9mm, .40 S&W and 10mm applications
- ✔ Carbon steel construction
- ✔ Blued finish
- ✔ For 1911 builds, repairs, and gunsmith work
Installation & Fitment
Confirm the pistol's chambering and physical geometry before selecting the hd oversized ejector. This version is offered for .38 Super, 9mm, .40 S&W and 10mm.
A qualified 1911 gunsmith should fit and inspect the part, including retention and clearance, and verify the assembled pistol operates safely. Minor fitment may be required; this design is intentionally oversized and requires custom fitting.
NOT A DROP-IN REPLACEMENT
This ejector is intentionally oversized. Gunsmith fitting and post-installation function testing are required.
Frequently Asked Questions
What pistols is this ejector intended for?
Compatible 1911 pistols chambered for .38 Super, 9mm, .40 S&W and 10mm; the individual frame and slide must be checked.
Is this a drop-in ejector?
No. The extra material is supplied so a professional can fit the part to the specific pistol.
What material is it made from?
Heat-treated carbon steel.
What finish does it have?
Blued.
Why are there different caliber versions?
Ejector geometry and fit can vary among pistol and cartridge configurations. Choose the appropriate caliber version and verify compatibility.
INSTALLATION & SAFETY WARNING
WE RECOMMEND THIS PART BE INSTALLED AND CHECKED BY A QUALIFIED AND COMPETENT GUNSMITH. Verify correct fit and safe operation before returning the firearm to service.
An HD Oversized Ejector for Professional 1911 Fitting
With extra fitting material, heat-treated carbon steel construction, and a blued finish, this EGW ejector is intended for qualified gunsmith work on compatible .38 Super, 9mm, .40 S&W and 10mm 1911 pistols.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
