EGW Extra Long 1911 Ejector - .38 Super, 9mm, .40 S&W and 10mm - Blued
Quick Check:
Fits: 1911 pistols with compatible ejector geometry
Component: Ejector
Application:.38 Super, 9mm, .40 S&W and 10mm
Material: Heat-treated carbon steel
Finish: Blued
Installation: Professional gunsmith fitting required
SKU: 10011
Made By: Evolution Gun Works
GUNSMITH-FIT EJECTOR
This part is intentionally oversized so a qualified gunsmith can fit it to an individual 1911. It is not intended as a universal drop-in replacement.
Product Overview
The EGW Extra Long 1911 Ejector for .38 Super, 9mm, .40 S&W and 10mm is designed for pistolsmiths and builders who need additional material when fitting an ejector to a compatible 1911.
Rather than attempting to make one finished ejector fit every frame and slide, the oversized geometry provides stock for a qualified gunsmith to establish the required fit and working surfaces.
This version is manufactured from heat-treated carbon steel with a blued finish. It is intended for the specified caliber family, not for every 1911 regardless of chambering.
Technical Specifications
- SKU: 10011
- Platform: 1911
- Calibers:.38 Super, 9mm, .40 S&W and 10mm
- Component: Extra Long ejector
- Material: Heat-treated carbon steel
- Finish: Blued
- Installation: Custom gunsmith fitting
Why Extra Length Matters
The extra-long design gives the gunsmith material at both the front and rear of the ejector. That additional length allows the finished part to be matched to the geometry of the particular slide and frame.
A longer rear area can accommodate blending requirements while the extended front provides a customizable ejector nose. Final dimensions depend on the individual firearm.
An Ejector for Caliber-Specific Gunsmith Work
This configuration is offered for .38 Super, 9mm, .40 S&W and 10mm. Ejector requirements differ by pistol and chambering, so identifying the correct version is part of a proper fitment decision.
The ejector works with the extractor to help direct a fired case out of the ejection port. Its interaction with the slide and spent cases must be evaluated after fitting.
Material and Finish
We machine this ejector from heat-treated carbon steel and finish it in blue.
A finish does not replace proper fitting. The gun's geometry and other ejection-system components must be compatible with the finished part.
GUNSMITH-FIT VS DROP-IN
This extra long ejector is intentionally supplied with extra material. It should not be represented as a finished drop-in part.
Why Choose This EGW Part?
- ✔ Extra material at the front and rear for gunsmith fitting
- ✔ Caliber-specific version for .38 Super, 9mm, .40 S&W and 10mm
- ✔ Made for builders who need to address custom slide and frame dimensions
- ✔ Heat-treated carbon steel construction
- ✔ Blued finish
- ✔ Manufactured by Evolution Gun Works
Installation & Fitment
Confirm the pistol's chambering and physical geometry before selecting the extra long ejector. This version is offered for .38 Super, 9mm, .40 S&W and 10mm.
A qualified 1911 gunsmith should fit and inspect the part, including retention and clearance, and verify the assembled pistol operates safely. Minor fitment may be required; this design is intentionally oversized and requires custom fitting.
NOT A DROP-IN REPLACEMENT
This ejector is intentionally oversized. Gunsmith fitting and post-installation function testing are required.
Frequently Asked Questions
What pistols is this ejector intended for?
Compatible 1911 pistols chambered for .38 Super, 9mm, .40 S&W and 10mm; the individual frame and slide must be checked.
Is this a drop-in ejector?
No. The extra material is supplied so a professional can fit the part to the specific pistol.
What material is it made from?
Heat-treated carbon steel.
What finish does it have?
Blued.
Why are there different caliber versions?
Ejector geometry and fit can vary among pistol and cartridge configurations. Choose the appropriate caliber version and verify compatibility.
INSTALLATION & SAFETY WARNING
WE RECOMMEND THIS PART BE INSTALLED AND CHECKED BY A QUALIFIED AND COMPETENT GUNSMITH. Verify correct fit and safe operation before returning the firearm to service.
An Extra Long Ejector for Professional 1911 Fitting
With extra fitting material, heat-treated carbon steel construction, and a blued finish, this EGW ejector is intended for qualified gunsmith work on compatible .38 Super, 9mm, .40 S&W and 10mm 1911 pistols.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
