![43400 43400](https://cdn11.bigcommerce.com/s-xqszwpwgcy/images/stencil/590x590/products/741/1757/_4_3_43400_272_1041__77947.1708474138.jpg?c=1)
![Browning AB3 Long Action Picatinny Rail 0 MOA Browning AB3 Long Action Picatinny Rail 0 MOA](https://cdn11.bigcommerce.com/s-xqszwpwgcy/images/stencil/590x590/products/741/1758/_4_3_43400-2_274_1043__86335.1708474139.jpg?c=1)
Browning AB3 Long Action Picatinny Rail 0 MOA
![49998 49998](https://cdn11.bigcommerce.com/s-xqszwpwgcy/images/stencil/590x590/products/995/2768/_4_9_49998_238_1602__84421.1708476134.jpg?c=1)
Replacement Set of Torx Screws w/ Bit for EGW Picatinny Mounts
![61000 61000](https://cdn11.bigcommerce.com/s-xqszwpwgcy/images/stencil/590x590/products/1002/2780/_6_1_61000_266_1611__18364.1708476243.jpg?c=1)
![30mm Tube Scope Rings .840" Low - Practical Aluminum 30mm Tube Scope Rings .840" Low - Practical Aluminum](https://cdn11.bigcommerce.com/s-xqszwpwgcy/images/stencil/590x590/products/1002/2781/hqdefault_42_29__53920.1708476243.jpg?c=1)
30mm Tube Scope Rings .840" Low - Practical Aluminum
![70304 70304](https://cdn11.bigcommerce.com/s-xqszwpwgcy/images/stencil/590x590/products/1055/2848/_7_0_70304_299_1675__33664.1708476677.jpg?c=1)
Blue Loctite
What is an A-Bolt? It could be an A-Bolt or an A-Bolt II or possibly even an AB3.
The A-Bolt was built in two main series. The original A-Bolt and the A-Bolt II. Both are very similar rifles and are considered part of a design family. The new AB3 — sometimes also referred to as an A-Bolt — is a different model and design. Accessories, such as bases and rings, magazines, etc. made for the original A-Bolt and A-Bolt II will not fit the AB3. All three of these designs are totally separate from the X-Bolt rifle as well.
This mount comes standard with a bevel on both sides making it ambidextrous.
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.