The factory Glock Gen 6 ORS mounting plate is made from plastic. EGW designed this plate as a direct replacement machined from high-strength 7075-T6 aluminum, giving shooters a rigid metal mounting platform for their RMR-footprint optic.
The EGW Glock Gen 6 ORS RMR / SRO Optic Plate was designed for shooters who want to replace the factory plastic optic plate with a stronger, rigid mounting solution machined from 7075-T6 aluminum.
Rather than changing the optic system or modifying the slide, the EGW plate is designed as a direct replacement for the factory Glock Gen 6 ORS mounting plate. Remove the factory plate and replace it with the EGW aluminum plate to mount a compatible Trijicon RMR-footprint optic.
The plate is machined from high-strength 7075-T6 aluminum and finished with Black Type III Hardcoat Anodizing for a durable, wear-resistant surface.
It supports a wide range of popular RMR-pattern optics including the Trijicon RMR, RMR HD and SRO, Holosun 407C, 507C, 508T and 507Comp, plus many additional compatible sights.
Need help understanding red dot footprints? Read our Optic Mounting Made Simple: RMR vs Docter vs RMSc Footprints guide.
The factory Glock Gen 6 ORS system uses a plastic optic mounting plate. While the factory plate provides an interface between the slide and optic, EGW wanted to offer shooters a machined metal alternative.
The EGW replacement plate is manufactured from 7075-T6 aluminum, an aluminum alloy commonly selected for demanding firearm components because of its high strength.
Replacing the factory plastic plate with a machined aluminum plate creates a rigid metal interface between the slide and optic while retaining the factory ORS mounting concept.
Factory Plate: Plastic construction supplied with the Glock Gen 6 ORS system.
EGW Plate: CNC machined from high-strength 7075-T6 aluminum and finished with Black Type III Hardcoat Anodizing.
This plate is designed around the factory Glock Gen 6 ORS mounting system.
There is no need to mill the slide or convert the pistol to a different optic cut. The EGW plate replaces the corresponding factory ORS plate and provides the mounting interface for compatible RMR-footprint optics.
This plate is designed specifically for Glock Gen 6 pistols equipped with the ORS optic mounting system. It is not intended to replace Glock MOS plates used on previous-generation pistols.
EGW machines this optic plate from 7075-T6 aluminum rather than plastic.
7075-T6 is a high-strength aluminum alloy well suited to components where strength, rigidity, and low weight are important.
After machining, the plate receives a Black Type III Hardcoat Anodized finish to provide additional surface hardness and wear resistance.
This mount is designed around the Trijicon RMR footprint and supports a wide selection of popular pistol red dots.
Important: Optic manufacturers may offer similarly named sights with different footprints. Always verify the mounting footprint of your exact optic before ordering.
The EGW Glock Gen 6 ORS optic plate is designed as a direct replacement for the corresponding factory ORS plate.
Remove the factory optic plate, clean the mounting surfaces, install the EGW plate, and then mount the compatible optic according to the optic manufacturer's recommendations.
Always verify that the plate sits completely flat against the slide and that the optic sits fully against the plate before tightening mounting screws.
Minor fitment may be required due to manufacturing tolerances.
Always verify that the mounting screws used with your optic provide proper thread engagement without bottoming out. Screw requirements can vary between optic manufacturers and models.
Why did EGW make this plate?
The factory Glock Gen 6 ORS mounting plates are plastic. EGW designed this plate to provide a direct replacement machined from high-strength 7075-T6 aluminum.
Is this a direct replacement for the factory Glock plate?
Yes. This plate is designed to replace the corresponding factory Glock Gen 6 ORS optic plate.
What is the EGW plate made from?
It is CNC machined from high-strength 7075-T6 aluminum.
What finish does it have?
The plate receives a Black Type III Hardcoat Anodized finish.
Will this fit previous-generation Glock MOS pistols?
This plate is designed specifically for the Glock Gen 6 ORS system. It should not be selected as a replacement for previous-generation MOS plates unless compatibility has been separately confirmed.
Will this fit a Trijicon RMR?
Yes. This plate uses the Trijicon RMR mounting footprint.
Will this fit a Trijicon SRO?
Yes. The Trijicon SRO uses the compatible RMR footprint.
Will this fit Holosun 407C and 507C optics?
Yes. Holosun 407C and 507C models use the compatible RMR mounting pattern.
Will this fit a Holosun 508T or 507Comp?
Yes. Both optics use the compatible RMR mounting footprint.
Does the slide need to be machined?
No. The EGW plate is designed to work with the existing Glock Gen 6 ORS optic mounting system.
WE RECOMMEND THIS OPTIC PLATE BE PROPERLY INSTALLED AND CHECKED BEFORE USE. Verify plate seating, optic compatibility, screw length, thread engagement, optic seating, and complete firearm function after installation.
Upgrade the factory Glock Gen 6 ORS optic mounting system with an EGW plate machined from high-strength 7075-T6 aluminum and Type III hardcoat anodized for a rigid, durable mounting platform for your RMR-footprint optic.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
