This plate is designed for factory CZ Optics Ready slides. It does not fit a standard Shadow 2 that uses a traditional rear sight dovetail instead of the factory optic cut.
Mount a Trijicon RMR, SRO, Holosun 407C, 507C, or other compatible RMR footprint red dot to your CZ Shadow 2, Shadow 2 Compact, or P-10 Optics Ready pistol with this precision-machined EGW adapter plate.
This plate interfaces with the factory CZ Optics Ready slide cut and converts it to the widely used Trijicon RMR footprint. That gives you access to a broad selection of proven competition, carry, range, and duty optics without requiring permanent machining of the slide.
The RMR footprint supports some of the most popular pistol red dots available, including the Trijicon RMR, RMR HD and SRO, along with Holosun 407C, 507C, 508T and 507Comp models. This makes the plate an excellent choice for shooters who want flexibility when selecting or changing optics.
Each plate is precision CNC machined from 7075 aluminum and finished with a matte black Type III hardcoat anodizing for excellent strength, wear resistance, and durability while keeping unnecessary weight to a minimum.
Due to manufacturing tolerances between firearms and optics, minor fitment may be required.
Need help understanding red dot footprints? Read our Optic Mounting Made Simple: RMR vs Docter vs RMSc Footprints guide.
Looking for another mounting option? View all CZ Shadow 2 parts, optic mounts, and plates.
If your Shadow 2 uses a traditional rear sight dovetail instead of a removable factory optic cover plate, you will need the appropriate EGW dovetail red dot mount.
Looking for another mounting option? View all CZ Shadow 2 parts, optic mounts, and plates.
This plate is designed for optics using the Trijicon RMR mounting footprint. Compatible red dots include:
Important: Optic manufacturers may offer multiple models with different mounting footprints. Always verify that your exact optic uses the Trijicon RMR mounting footprint before ordering.
This plate installs into the factory CZ Optics Ready slide cut after removal of the factory optic cover plate or existing adapter plate.
Important: Always verify screw length and thread engagement before applying final torque. Screw requirements can vary between optic models. A screw that is too long may bottom out before properly securing the optic.
Does this plate fit the CZ Shadow 2 Optics Ready?
Yes. This plate is specifically designed for the factory Optics Ready Shadow 2.
Does this plate fit the CZ Shadow 2 Compact Optics Ready?
Yes. The factory Optics Ready Shadow 2 Compact is compatible.
Does this fit the CZ P-10 C, P-10 F and P-10 S Optics Ready?
Yes. This plate fits factory Optics Ready versions of the P-10 C, P-10 F and P-10 S.
Will this fit a standard Shadow 2 that is not Optics Ready?
No. Standard Shadow 2 pistols with a traditional rear sight dovetail require a different EGW dovetail mount.
Will this fit a Trijicon RMR?
Yes. This plate is designed around the Trijicon RMR footprint.
Will this fit a Trijicon SRO?
Yes. The SRO uses the compatible Trijicon RMR mounting footprint.
Will this fit a Trijicon RMR HD?
Yes. The RMR HD uses the compatible RMR footprint.
Will this fit the Holosun 407C and 507C?
Yes. Both use the compatible RMR footprint.
Will this fit the Holosun 508T and 507Comp?
Yes. Both optics use the compatible RMR mounting pattern.
What torque should I use for the optic mounting screws?
EGW recommends 15 in-lbs for the optic mounting screws.
Does minor fitting ever need to be done?
Due to manufacturing tolerances between individual firearms and optics, minor fitment may be required.
WE RECOMMEND THIS PLATE BE INSTALLED AND CHECKED BY A QUALIFIED AND COMPETENT GUNSMITH. Always verify optic compatibility, screw length, thread engagement, plate seating, and safe firearm function before use.
Modification of your firearm may nullify the manufacturer's warranty. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
