EGW Heavy Duty Rimfire Scope Bases
Tikka T1x Scope Mounts and Picatinny Rails
Build a dependable optic platform for your Tikka T1x with an EGW one-piece Picatinny rail. Choose the correct right-hand or left-hand mount, then select 0, 20, 30 or 40 MOA for your rifle, optic and intended shooting distance.
7075-T6 Aluminum | Made in USA
Quick Fitment Check
These mounts fit the Tikka T1x, including MTR and UPR models. The rail is not ambidextrous, so the mount must match the rifle's handedness. Right-hand and left-hand versions are different.
These T1x rails are not intended for Tikka T3 or T3x receivers. Confirm the rifle model, handedness and receiver-hole spacing before ordering. Minor fitment may be required.
Built for the Tikka T1x Receiver
Every rail on this page uses the same heavy-duty one-piece construction. Select the correct handedness and MOA configuration below.
7075-T6 Aluminum
Machined from solid 7075-T6 aluminum and finished with a matte black hardcoat anodize.
One-Piece Picatinny
Full-length cross slots provide flexible ring placement for proper eye relief and optic positioning.
T1x-Specific Dimensions
2.508-inch center spread, 6.276-inch overall length and approximately 2.5 ounces.
Four MOA Choices
Choose 0, 20, 30 or 40 MOA based on your optic's adjustment range and intended use.
Right-Hand Tikka T1x Picatinny Rails
Choose from 0, 20, 30 or 40 MOA. The 30 and 40 MOA listings include a handedness selection, so confirm the right-hand option before adding the mount to your cart.
Left-Hand Tikka T1x Picatinny Rails
Dedicated left-hand T1x listings are available in 0 and 20 MOA. These mounts fit left-hand T1x rifles, including MTR and UPR models.
Need a left-hand 30 or 40 MOA rail? The 30 and 40 MOA product pages include a handedness selection. Select the left-hand option and verify the configuration before adding the mount to your cart.
Tikka T1x Scope Base Fitment Guide
Match both the rifle model and handedness. A T1x rail should not be selected solely because another rifle carries the Tikka name.
| Rifle | Correct Section | Fitment Note |
|---|---|---|
| Right-Hand Tikka T1x | Right-Hand Rails | Fits T1x models, including MTR and UPR. Select the right-hand configuration. |
| Left-Hand Tikka T1x | Left-Hand Rails | Requires a left-hand rail. Right-hand T1x rails are not ambidextrous. |
| Tikka T1x MTR or UPR | Match Handedness | MTR and UPR models are included in the stated T1x fitment. Handedness still matters. |
| Tikka T3 or T3x | Browse Tikka Mounts | Do not use a T1x-specific rail. Select a product whose listing names your exact Tikka model. |
Which Tikka T1x MOA Rail Should You Choose?
More cant is not automatically better. The right choice depends on the scope's total elevation travel, the intended zero and how much additional elevation you expect to dial.
0 MOA
A neutral base for general-purpose rimfire use when the optic already has enough internal adjustment for the intended distances.
20 MOA
A moderate incline that preserves additional upward scope adjustment while remaining a versatile choice for many precision rimfire setups.
30 MOA
Additional elevation bias for long-range rimfire and competition setups that require more dialing than a 20 MOA base provides.
40 MOA
A specialized high-cant option for setups that need maximum retained elevation. Verify that your scope can still achieve the desired zero.
Why Add a Picatinny Rail to a Tikka T1x?
Flexible Ring Positioning
Full-length Picatinny slots provide multiple mounting positions, helping the shooter establish proper eye relief without relying on a single fixed ring location.
One-Piece Alignment
A single rail provides one continuous mounting surface for both rings and avoids the separate positioning required by two-piece bases.
Purpose-Built MOA Options
Four elevation choices let you match the base to a general-purpose rimfire rifle, an NRL22 build or a more specialized long-range configuration.
Installation and Fitment Note
Always verify the rifle is unloaded before beginning work. Confirm the model, handedness, 2.508-inch receiver-hole spacing, screw fit and screw length before installation. Clean the receiver and fasteners, then follow the 20 in-lb torque specification and installation directions on the individual product page. Mounting hardware is included as described on each listing. Minor fitment may be required. If you are uncertain about fit or installation, consult a qualified gunsmith.
Tikka T1x Scope Mount FAQs
Common questions about T1x rail fitment, handedness, rings and MOA.
Building a Precision Rimfire or NRL22 Rifle?
Rail cant is only one part of the setup. Ring height must also provide objective clearance and a comfortable shooting position.
Read the NRL22 and Rimfire Scope Ring GuideChoose the Correct Tikka T1x Scope Mount
Match your rifle's handedness, select the appropriate MOA and review the complete fitment information before ordering.