This Mount Fits:

• T3x Superlite Camo
• T3x Superlite
• T3x Compact
• T3x Lite
• T3x Lite Stainless
• T3x Compact Tactical Rifle
• T3x Varmint
• T3x Laminated Stainless
• T3x Forest
• T3x Hunter Stainless
• T3x Hunter
• T3 Hunter
• T3 Laminated Stainless
• T3 Varmint
• T3 Super Varmint
• T3 Varmint Stainless
• T3 Compact Tactical

Pre 2004 Tikkas May Require Metric Screws.

EGW mount does not have a recoil lug.

Tikkas are known to have debris left in the screw hole, which may require the threaded holes be cleaned out using a bottoming tap. You can use the bottoming tap we have to clean out the threads before installing your screws.

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided
Center Spread: 3.245"
Overall Length of Mount: 7.458"

Our Heavy Duty (HD) 0 MOA picatinny scope mounts for the bolt action Tikka T3 and Tikka T3x are made in the U.S.A. and fit all caliber Tikka T3 models. Tikka rifles produced before 2004 may require metric screws. Our HD and Hunter series mounts are machined from 7075 T6 aluminum and are hardcoat anodized for a durable finish that can withstand whatever is thrown at them.

Picatinny rails are a great addition to hunting rifles and precision rifles. Picatinny scope mounts allow you to use weaver or picatinny rings. There are multiple advantages of a one piece base over a two piece base or dovetail rings. One of the advantages is a one piece base increases accuracy by keeping the rings precisely aligned. Another advantage is a one piece picatinny base allows the user to quickly exchange optics between hosts, due to the standardized spacing of picatinny spec.

Metric screws are only available with hex heads. Check out the Tikka FAQ page for more info.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.