Mounting Hardware is Included

This mount fits:

• 1911s with a G.I. style rear sight cut
• Springfield 1911A1
• Iver Johnson 1911A1
• Iver Johnson 1911A1 9
• Iver Johnson Falcon 45
• Iver Johnson Thrasher 45
• Iver Johnson Thrasher 9
• Iver Johnson 1911A1 Chrome 38W
• Iver Johnson 1911A1 Chrome 38P
• Iver Johnson 1911A1 CHRW45
• Iver Johnson 1911A1 CHR45P
• Iver Johnson 1911A1 CHR45WP
• Iver Johnson 1911A1 Zombie
• Iver Johnson 1911A1 Copperhead
• Iver Johnson 1911A1 Water Moccasin
• Iver Johnson 1911A1 Boa
• Iver Johnson 1911A1 Muddy Girl 9mm
• Iver Johnson 1911A1 Digital Navy
• Iver Johnson 1911A1 Digital Snow 45ACP
• SAR 2000

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw

Red Dot Fitment:
Bushnell RXS-100
Crimson Trace CTS-1500
Holosun 407K*
Holosun 407k-GR
Holosun 507K*
Holosun 507k-GR
Holosun EPS-GR*
Holosun EPS-RD*
Holosun EPS-Carry-GR*
Holosun EPS-Carry-RD*
Jpoint
Leupold Delta Point Pro
Optima
Redfield Accelerator
Shield RMS
Shield RMSc
Shield SMS
Sig Romeo Zero

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.