
Blue Loctite

Blue Loctite


Vortex Optics Venom 6 MOA Red Dot Sight


Vortex Optics Venom 6 MOA Red Dot Sight
This mount fits:
Zev slides factory cut for the RMR platform with the threaded posts (shown in the image below).
Will work with Wuelf slides.
If your gun has a cut out for the optics plate, this plate will work with your application.
The screws to mount the red dot to the plate are provided at no extra cost. We recommend using 15 in/lbs.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length:
Overall Width:
Torque Specs: 15 in/lbs
Mounting Hardware:
(2) 6-32 Button Head Screws
(2) 6-32 Flat Head Screws
This mount requires a 5/64" and 1/16" wrench for installation.
Red Dot Fitment:
The EGW red dot sight mount adapter plates for the RMR Cut Zev Slides are meant to be installed directly on the slide. Simply remove the sight plate on your gun (if applicable) and replace it with our mount in order to mount your Vortex Viper, Vortex Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear cover plate
- Install the EGW sight mount and torque the mounting plate screws
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque red dot mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.