Description

Details

Product Reviews

Description

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.

WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Details

Short Description:	Mounting Hardware is Included This mount does not fit the Vortex Venom or Viper, that mount is available	Specifications:	Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Scr
Scope Mount Color:	Black Hardcoat Anodized Type III
Red Dot Brand:	Vortex Razor
Red Dot Brand:	C-More STS
Red Dot Brand:	C-More STS2
Red Dot Brand:	C-More RTS
Red Dot Brand:	C-More RTS2
Red Dot Brand:	Burris Fastfire 2
Red Dot Brand:	Burris Fastfire 3
Red Dot Brand:	Burris Fastfire 4
Red Dot Brand:	Hex Dragonfly
Red Dot Brand:	Primary Arms SLx RS-10
Red Dot Brand:	Leapers UTG OP3 Micro
Red Dot Brand:	Hawke Sport Optics Reflex 1x25
Material:	7075 Aluminum
Model:	Auto (Mk I, Mk II, MK III, Mk IV, P85, P89, P90-P95, P97, 22/45
Brand:	Ruger
Red Dot Brand:	C-More RTS / STS;Sig Sauer Romeo 3 Max;Vortex Razor
GTIN:	841370113033
Pin Selection:	Pin Set

Product Reviews

2 reviews Write a Review

4
-

Mike Harrell on Mar 28th 2024

Construction and materials are excellent. However the dovetail required too much fitting due to the excessive height. Have used the adapter for months without problem.
5
-

Thomas on Aug 6th 2023

It was very simple to do, the hardest part was removing the old sight. It did not want to move at all at first. I'm thinking about getting a sight-moving tool if I do it again. Installing the Vortex Razor mount was simple and easy. I have a couple more Rugers that I might just have to do this to them.

Blue Loctite

70304

$5.50

Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the...

Quantity:

Add to Cart

Quantity:

Add to Cart

Quick view

Blue Loctite

70304

$5.50

Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the...

Quantity: