Trijicon RMR / SRO, Holosun 407c / 507c Red Dot Sight Mount Adapter for Tristar Viper and Other Semi Auto Shotguns

No reviews yet Write a Review
Ask Questions

Trijicon RMR / SRO, Holosun 407c / 507c Red Dot Sight Mount Adapter for Tristar Viper and Other Semi Auto Shotguns

$49.99
  • SKU: 49554
In Stock & Ready To Ship!
Current Stock:Only left:
Description

This mount fits the Tristar Viper / Semi Auto Shotguns and will allow you to mount a Trijicon RMR red dot sight. Simply remove the mount on your gun and replace it with our mount. You can take our mount off and replace your mount at any time. Mounting hardware included.

This mount fits:

  • Tristar Shotguns (factory drilled and tapped)

Specifications

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Hole Spacing: 1.18"
Torque Specs: 15 in/lbs

Mounting Hardware:
(2) 6-32 x 5/16" Button Head Screws - Requires 5/64 Wrench or Driver
(2) 6-32 x 3/8" Flat Head Screws - Requires 5/64 Wrench or Driver
(2) M4 x .7 x 8mm Flat Head Screws - Requires use of 2.5mm Hex Key

Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice



Installation Instructions
- Remove the factory mount
- Install the EGW Sight Mount on the receiver
- Torque mounting screws to 15in/lbs
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

(2) 6-32 Flat Head Screws - Requires use of 5/64" Hex Key (for Trijicon RMR, SRO / Holosun 407c, 507c, 509t)
(2) M4 x .7 x 8mm Flat Head Screws - Requires use of 2mm Hex Key

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.

WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
 

Frequently Bought Together:

Total: Inc. Tax
Total: Ex. Tax