Description

Details

Product Reviews

Description

Mounting Hardware is Included

This mount fits (including but not limited to):

1911s with Novak style rear sight cut (please see below for a comprehensive list)
- CZ 75 Bull Shadow
- STI with fixed rear sights
- STI Marauder
- Christensen Arms 1911
- Colt Delta Elite 10mm (2016 and newer)
- Ruger SR 1911 (fixed rear sight)
- Sig Sauer Nightmare
- Citadel 1911s
- Springfield Armory 1911 EMP - 9mm / .40
- Springfield Armory 1911 EMP 4" Lightweight Champion - 9mm / .40
- Springfield Armory 1911 EMP 4" Conceald Carry Contour Model - 9mm / .40
- Springfield Armory 1911 Champion Operator Lightweight - .45
- Springfield Armory 1911 Range Officer Compact - 9mm / .45
- Springfield Armory 1911 Range Officer Champion - 9mm / .45
- Springfield Armory 1911 Range Officer Elite Compact - 9mm / .45
- Springfield Armory 1911 Range Officer Elite Champion - 9mm / .45
- Springfield Armory 1911 Range Officer Elite Operator - 9mm / .45
- Springfield Armory 1911 Loaded (Fixed Rear Sight) - .45
- Springfield Armory 1911 TRP
- Rock Island TCM Rock Standard MS HC Combo - 22TCM/9MMTCM
- Rock Island TAC Ultra FS Combo - 22TCM/9MMTCM
- Rock Island Rock Ultra FS Combo - 22TCM/9MMTCM
- Rock Island TAC Ultra FS HC Combo - 22TCM/9MMTCM
- Rock Island TAC Ultra MS HC Combo - 22TCM/9MMROCK
- Rock Island Ultra CS-LTCM Rock Standard FS HC Combo - 22TCM/9MMROCK
- Rock Island Ultra CCO
- Rock Island TAC Ultra FS HC - 45 ACP
- Rock Island TAC Standard FS - 45 ACP
- Rock Island TAC Ultra FS HC - 9MM
- Rock Island TAC Ultra FS - 45 ACP
- Rock Island TAC Ultra CS - 45 ACP
- Rock Island TAC Ultra CS - 9MM
- Rock Island TAC Ultra FS - 10MM
- Rock Island TAC Ultra MS - 10MM
- Rock Island Rock Standard FS - 45ACP
- Rock Island M1911-A1 FS Tac
- Rock Island Rock Ultra CS - 45 ACP
- Rock Island Rock Ultra CS-L
- Rock Island Rock Standard MS - 45ACP
- Rock Island Rock Ultra CCO
- Rock Island Rock Standard FS - 9MM
- Rock Island Rock Standard CS - 45 ACP
- Rock Island Rock Ultra FS - 9MM
- Rock Island Rock Ultra FS - 10MM
- Rock Island Rock Standard FS 2-TONE - 45 ACP
- Rock Island Rock Ultra MS - 10MM
- Rock Island Rock Standard FS MATTE NICKEL - 45 ACP
- Rock Island Rock Ultra FS - 40 S&W
- Rock Island Rock Ultra FS - 45 ACP
- Rock Island Rock Ultra FS HC - 10MM
- Rock Island Rock Ultra MS - 45 ACP
- ATI GSG 1911 .22
- ATI GSG 1911 Target
- ATI GSG 1911 HGA
- ATI GSG 1911 CA Compliant
- ATI GSG 1911 ADOP
- Iver Johnson Hawk 45 Matte
- Iver Johnson Hawk 45 Matt NS
- Iver Johnson Hawk 9 Matte
- Iver Johnson 9 Matte NS
- Iver Johnson Hawk Polished
- Iver Johnson Hawk Polished NS
- Iver Johnson Thrasher Polished 45
- Iver Johnson Thrasher Polished 45 NS
- Iver Johnson Thrasher Polished 9
- Iver Johnson Thrasher Polished 9 NS
- Iver Johnson Thrasher Polished 40
- Iver Johnson Thrasher Polished 40 NS
- Iver Johnson Thrasher CHR45
- Iver Johnson Thrasher CHR45 NS
- Iver Johnson Thrasher CHR9
- Iver Jackson Thrasher CHR9 NS
- Iver Johnson Hawk Digital Navy NS
- Iver Johnson Hawk O.D. Green
- Iver Johnson Hawk O.D. Green NS
- Iver Johnson Hawk Coyote Tan
- Iver Johnson Hawk Coyote Tan NS
- Iver Johnson Thrasher SS 45
- Iver Johnson Thrasher SS 45 NS
- Iver Johnson Thrasher SS 9
- Wilson Combat Supergrade Commander Special
- Wilson Combat Tactical Carry Compact
- Wilson Combat Tactical Supergrade
- Wilson Combat Tactical Supergrade Compact
- Wilson Combat Tactical Supergrade Professional
- Wilson Combat Tactical Carry
- Wilson Combat Tactical Carry Professional
- Wilson Combat Tactical Elite
- Wilson Combat Vickers Elite
- Wilson Combat Vickers Elite Commander
- Wilson Combat X-Tac
- Wilson Combat X-Tac Compact
- Wilson Combat X-Tac Elite
- Wilson Combat X-Tac Elite Carry Comp Pro
- Wilson Combat X-Tac Elite Professional
- Wilson Combat X-Tac Professional
- Wilson Combat X-Tac Elite Compact
- Wilson Combat X-Tac Elite Carry Comp
- Wilson Combat Protector
- Wilson Combat CQB
- Wilson Combat CQB Elite
- Wilson Combat CQB Tactical LE
- Wilson Combat CQB Light-Rail Lightweight
- Wilson Combat Ultralight Carry
- Wilson Combat Ultralight Carry Commander
- Wilson Combat Ultralight Carry Professional
- Wilson Combat Ultralight Carry Compact
- Wilson Combat Ultralight Carry Sentinel
- Wilson Combat ULC Commander Compact
- Wilson Combat Carry Comp
- Wilson Combat Carry Comp Professional
- Wilson Combat Hackathorn Special
- Wilson Combat Hackathorn Special Commander
- Wilson Combat Tactical Elite
- Wilson Combat EDC X9
- Wilson Combat EDC 9 Compact
- Wilson Combat EDC 9 Professional
- Wilson Combat Protect Professional
- Wilson Combat Elite Professional
- Wilson Combat Professional
- Wilson Combat Professional Lightweight
- Wilson Combat Professional LR-LW
- Wilson Combat Bill Wilson Carry
- Wilson Combat Protector Compact
- Wilson Combat CQB Compact
- Wilson Combat CQB LR-LW Compact
- Wilson Combat CQB Commander
- Wilson Combat CQB Commander Compact
- Wilson Combat Sentinel Compact

Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Minor modification may be neccessary for Rock Islands. Our products should be installed and checked by a qualified and competent gunsmith.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.

WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Details

Short Description:	Mounting Hardware is Included This mount fits (including but not limited to): Firearms with a traditional Novak cut rear sight. Please note, some manufacturers use licensed Novak rear sights. These are c
Specifications:	Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws,
Scope Mount Color:	Black Hardcoat Anodized Type III
Material:	7075 Aluminum
Model:	Novak Rear Sight Cut
Model:	SR 1911
Brand:	1911
Brand:	Colt
Brand:	Iver Johnson
Brand:	Remington
Brand:	Rock Island
Brand:	Ruger
Brand:	Sig Sauer
Brand:	Springfield
Brand:	STI (Staccato)
Brand:	Wilson Combat
Red Dot Brand:	Holosun 507C
Red Dot Brand:	Holosun 508T
Red Dot Brand:	Holosun 407C
Red Dot Brand:	Trijicon SRO
Red Dot Brand:	Swampfox Justice
Red Dot Brand:	Swampfox Liberty
Red Dot Brand:	Swampfox Kingslayer
Red Dot Brand:	Viridian RFX35
Red Dot Brand:	Bushnell RXM-300
Red Dot Brand:	ADE Advanced Optics RD3 (Stingray, Raptor, Valkyrie)
Red Dot Brand:	Trijicon RMR HD
Red Dot Brand:	Holosun HS507Comp
Red Dot Brand:	Swampfox Justice II
Red Dot Brand:	Swampfox Liberty II
GTIN:	841370116782
Pin Selection:	Pin Set
Brand:	Novak

Product Reviews

20 reviews Write a Review

4
Novak and Rock Island

Terry B on Jul 10th 2024

This is a FYI the plate will Fit after doing some major filing and patience
5
-

Mark on May 16th 2024

Works on sig p220 .22lr conversion slide, a little oversized but nothing a stone can't take off. Very solid.
4
-

Thomas on Apr 22nd 2024

Definitely a tight fit, now that it’s installed it’s Not coming off again. It took quite a few hour removing little by little enough metal for it to fit on my Dan Wesson. Overall I’m happy with it, the placement also prevents burnt powder build up on the glass.
5
-

Christopher on Mar 29th 2024

Well built mount. Needed some filing to fit in the Novak Low Mount dovetail. Very solid and I like it.
5
-

DENNIS on Feb 23rd 2024

The mount works very well. I have used it for a Tracticon RMR Dot Sight. A sight pusher is highly recomended to remove the old sight and to push the EGW mount onto place.
5
-

Anonymous on Feb 16th 2024

Excellent product. I opted to have local Gsmith put it on
1
-

Daniel on Feb 14th 2024

Novak/Holoson mount plate. The professional gun smith had some issues with the mount. While using the proper 1911 rear sight pushing tool, the sides of the dovetail crushed inwards as there was a cut out space as part of the design and it was not solid all the way across the side of the dovetail.. He had to modify a brass punch specifically to be able to mount the plate on the 1911 (Novak cut) to prevent doing any further damage. He was able to get the plate into place, but there was cosmetic damage done due to the design on the side of the dovetail. Both he and I were disappointed in the design.
5
-

Scott Ventresco on Jan 19th 2024

Very nice mount for Springfield 1911. Fit with minor sanding.
5
-

Steve on Jan 15th 2024

Perfect (tight) fit
5
-

Delfino on Jan 14th 2024

Works very good and I didn’t have to permanently modify my gun by having it milled!

Trijicon RMR / SRO, Holosun 407c / 507c Mount for Novak

Trijicon RMR / SRO, Holosun 407c / 507c Mount for Novak

Novak and Rock Island

-

-

-

-

-

-

-

-

-

Frequently Bought Together:

HS507C X2 Holosun 507C Reflex Sight (Red Dot)

HS507C X2 Holosun 507C Reflex Sight (Red Dot)

Recently Viewed Products

Trijicon RMR / SRO, Holosun 407c / 507c Mount for Novak

Write a Review

Trijicon RMR / SRO, Holosun 407c / 507c Mount for Novak

Trijicon RMR / SRO, Holosun 407c / 507c Mount for Novak

Frequently Bought Together:

Related Products

HS507C X2 Holosun 507C Reflex Sight (Red Dot)

HS507C X2 Holosun 507C Reflex Sight (Red Dot)

Recently Viewed Products