Mounting Hardware is Included
This mounts fits:
- CZ 75
- CZ 75 SP-01
- CZ 75 SP-01 Phantom
- CZ 75 SP-01 Shadow*
- CZ 85
- CZ 97B
- CZ 97D
- CZ P-01
- CZ PCR (there will be a gap under the front of the adapter plate)
- Tristar P120
This mount does not fit:
*We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application.
Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dots.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
This mount fits:
CZ 75
CZ 75 SP-01
CZ 75 SP-01 Phantom
CZ 75 SP-01 Shadow*
CZ 85
CZ 97B
CZ 97D
CZ P-01
CZ PCR (there will be a gap under the front of the adapter plate)
Tristar P120
This mount does not fit:
CZ P-07
CZ P-09
*We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Alt Description:
- CZ 75 RMR mount
- CZ 75 SP-01 RMR mount
- CZ 85 RMR mount
- CZ P01 RMR mount
- CZ P07 RMR mount
- CZ P09 RMR mount
- CZ PCR RMR mount
- CZ 75 Holosun 507c mount
- CZ 75 SP-01 Holosun 507c mount
- CZ 85 Holosun 507c mount
- CZ P01 Holosun 507c mount
- CZ P07 Holosun 507c mount
- CZ P09 Holosun 507c mount
- CZ PCR Holosun 507c mount
- CZ 75 Red Dot mount
- CZ 75 SP-01 Red Dot mount
- CZ 85 Red Dot mount
- CZ P01 Red Dot mount
- CZ P07 Red Dot mount
- CZ P09 Red Dot mount
- CZ PCR Red Dot mount
- CZ 75 Accessories
