Colt Gold Cup Replacement Screw
Colt Gold Cup Replacement Screw
HS507C X2 Holosun 507C Reflex Sight (Red Dot)
HS507C X2 Holosun 507C Reflex Sight (Red Dot)
Short Gold Cup Trigger Serrated
Short Gold Cup Trigger Serrated
**Requires second screw hole to be drilled and tapped if using on 2020 or newer Colt Python**
This mount fits:
Colt Anaconda (fits 2020 and newer models)
Colt Python (fits 2020 and newer models if the second screw hole is drilled and tapped in the top strap)
Torque 6-40 x 3/8 mounting screw to 20 in/lbs
Torque 4-48 x 3/8 mounting screw to 10 in/lbs
Torque 6-32 red dot mounting screws to 15 in/lbs
Some newer Pythons are only drilled and tapped for one screw on the top strap, if your gun only has one hole on the top strap, this mount WILL NOT WORK.
This is for Colt models with the Elliason style adjustable rear sight.
Specifications
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware:
(2) 6-32 x 7/16" Flat Head Screws
(1) 6-40 x 3/8 Flat Head Screw
(1) 4-48 x 3/8 Flat Head Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque 6-40 x 3/8 mounting screw to 20 in/lbs
- Torque 4-48 x 3/8 mounting screw to 10 in/lbs
- Torque red dot mounting screws to 15 in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Click here to see a video from Vortex on how to install our red dot base on a slide.