Quick Check: Confirm Your Pistol and Optic.
✅ Fits: Beretta 92 RDO models including Beretta 92 FS, Beretta 92 G, and Beretta 92 FS Fusion.
Optic Footprint: Trijicon RMR / SRO and Holosun 407C / 507C style footprint.
Material: 7075 Aluminum.
Upgrade your Beretta 92 RDO with a precision-machined EGW red dot mount designed for the Trijicon RMR / SRO and Holosun 407C / 507C footprint. This mount provides a secure interface between your factory RDO slide cut and some of the most popular duty, carry, and competition red dot optics on the market.
Machined from durable 7075 aluminum and finished in matte black hardcoat anodizing, this mount is built to handle slide-mounted optic use while keeping the setup lightweight and reliable.
This mount is made specifically for Beretta 92 RDO pistols and is intended for optics using the RMR-style footprint. Always confirm both your pistol model and optic footprint before ordering.
Technical Specifications
- Mount Type: Red Dot Adapter Plate
- Designed For: Beretta 92 RDO
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodized Type III
- Overall Length: 1.780"
- Overall Width: 1.1"
- Made in: USA
Complete Mounting Kit
- (2) M3 x .5, 8mm Long Flat Head Cap Screws - Requires T10 Torx
- (2) 6-32 x 7/16" Flat Head Screws
Compatibility
This mount fits Beretta Factory RDO Slides with Dual-Pocket Milling:
- Beretta M9A4 Full Size
- Beretta M9A4 Centurion
- Beretta M9A4 Compact
- Beretta M9A4 Overlanding
- Beretta M9A4 Lunar
- Beretta 92X RDO Full Size
- Beretta 92X RDO Centurion
- Beretta 92X RDO Compact
- Beretta 92X RDO Inox
- Beretta 92XI SAO Full Size
- Beretta 92XI Tactical
- Beretta 92XI Squalo
- Beretta 92XI Launch Editions
- Beretta 92GTS Full Size
- Beretta 92GTS Centurion
- Beretta 92X Performance Carry Optic
- Beretta 92X Performance Defensive
Note: Fits all specialized factory Cerakote and Special Edition models of the series listed above, provided they feature the factory optics-ready 2 CUT slide.
This mount does NOT fit:
- Standard Dovetail Slide Models (Any legacy 92 FS, 92 G, M9, M9A1, M9A3, or standard non-RDO 92X models that require removing the rear sight)
- Original 92X Performance / 92 Performance (Standard non-optics ready iron sight slides)
- Beretta 94X Performance Series
- Beretta 80X Cheetah (Uses a scaled-down micro-variant of the pocket geometry)
- Beretta APX Series (All models)
- Taurus 92
Compatible Red Dot Optics
- Trijicon RMR
- Trijicon SRO
- Trijicon RMR HD
- Holosun 407C
- Holosun 507C
- Holosun 508T
- Holosun 507Comp
- Swampfox Justice
- Swampfox Justice II
- Swampfox Liberty
- Swampfox Liberty II
- Swampfox Kingslayer
- Viridian RFX35
- Bushnell RXM-300
- ADE Advanced Optics RD3 Stingray, Raptor, and Valkyrie
Why Choose an EGW Red Dot Mount?
A red dot mount is the connection point between your pistol and optic. A properly machined mount helps maintain alignment, supports the optic under recoil, and provides a secure foundation for consistent performance.
- ✔ Precision-machined for Beretta 92 RDO pistols
- ✔ Made from strong, lightweight 7075 aluminum
- ✔ Hardcoat anodized for wear and corrosion resistance
- ✔ Designed for popular RMR-style red dot optics
- ✔ Mounting hardware included
RMR Footprint Compatibility
This mount is designed around the Trijicon RMR footprint, one of the most widely used pistol red dot footprints available. Many popular optics use this same mounting pattern, including the Trijicon SRO and several Holosun C-series optics.
Because optic manufacturers can change designs over time, always verify your optic footprint before installation.
Installation Notes
Install the EGW mount using the included 6-32 flat head screws. We recommend using a small amount of blue Loctite on the screws and verifying proper thread engagement before firing.
Minor fitting may be required due to firearm and optic manufacturing tolerances. If you are unsure about installation, we recommend having the mount installed by a qualified gunsmith.
100% Made in the USA
Every EGW mount is 100% made in the USA. That includes the mount itself, mounting screws, packaging, clamshell, and backer card. By keeping every step domestic, EGW maintains strict control over quality, consistency, and reliability.
Beretta 92 RDO Red Dot Mount FAQ
Will this fit a standard Beretta 92 without the RDO cut?
No. This mount is designed for Beretta 92 RDO pistols. It will not fit standard non-RDO Beretta 92 slides.
Will this fit the Trijicon RMR and SRO?
Yes. This mount is designed for the Trijicon RMR / SRO footprint.
Will this fit Holosun 407C and 507C optics?
Yes. This mount fits Holosun 407C and 507C optics, along with other compatible RMR-footprint optics.
Does mounting hardware come with the mount?
Yes. This mount includes (2) 6-32 flat head screws.
Warning: This product may contain trace amounts of lead. For more information, visit www.P65Warnings.ca.gov.
