This EGW red dot mount is designed to fit both the Kimber Micro 9 and Kimber Micro 380. It replaces the factory rear sight and installs into the existing rear sight dovetail, allowing an RMR-footprint optic to be added without machining the slide.
Add a Trijicon RMR, SRO, Holosun 407C, 507C, or other compatible RMR-footprint red dot to your Kimber Micro 9 or Kimber Micro 380 without permanently modifying the slide.
This EGW dovetail mount replaces the factory rear sight and provides the widely used Trijicon RMR mounting footprint. That gives Kimber Micro owners access to a broad range of popular pistol optics from Trijicon, Holosun, Swampfox, Viridian, Bushnell, ADE Advanced Optics, and other manufacturers.
Each mount is precision machined from 7075 aluminum and finished with a matte black Type III hardcoat anodizing for durability and wear resistance. Because the mount installs into the existing rear sight dovetail, no milling or permanent slide modification is required.
The installation is also reversible. If you decide to return the pistol to its original configuration, the EGW mount can be removed and the factory rear sight can be reinstalled.
Due to manufacturing tolerances between individual firearm dovetails, minor fitment may be required.
Need help understanding red dot footprints? Read our Optic Mounting Made Simple: RMR vs Docter vs RMSc Footprints guide.
This EGW red dot mount fits:
The mount replaces the factory rear sight and installs directly into the existing rear sight dovetail. No slide milling is required.
This mount is designed for optics using the Trijicon RMR mounting footprint. Compatible red dots include:
Important: Optic manufacturers may offer similarly named models that use different mounting footprints. Always verify that your exact optic uses the Trijicon RMR mounting pattern before ordering.
Trijicon recommends the use of a sealing plate with applicable Trijicon red dots to help prevent water from entering the optic. Follow the optic manufacturer's recommendations for your specific sight.
Always verify that the screws being used are appropriate for your exact optic and provide sufficient thread engagement without bottoming out.
Installation requires removal of the factory rear sight. The EGW red dot mount is then installed into the existing rear sight dovetail and secured with the supplied set screw before the optic is mounted.
Because dovetail dimensions can vary slightly between individual firearms, minor fitment may be required. A quality sight pusher is recommended whenever possible.
This mount is designed for a secure press fit. Due to manufacturing tolerances between individual Kimber slides, minor fitting may be required. A sight pusher is recommended for installation. Do not force the mount into the dovetail if excessive resistance is encountered.
Does this mount fit the Kimber Micro 9?
Yes. This mount is designed to fit the Kimber Micro 9 rear sight dovetail.
Does this mount fit the Kimber Micro 380?
Yes. This mount also fits the Kimber Micro 380.
Do I need to machine the slide?
No. This mount replaces the factory rear sight and installs into the existing dovetail.
Will this fit a Trijicon RMR?
Yes. This mount is designed around the Trijicon RMR footprint.
Will this fit a Trijicon SRO?
Yes. The Trijicon SRO uses the compatible RMR mounting footprint.
Will this fit the Trijicon RMR HD?
Yes. The RMR HD uses the compatible RMR footprint.
Will this fit Holosun 407C and 507C optics?
Yes. Holosun 407C and 507C models use the compatible RMR mounting footprint.
Will this fit a Holosun 508T or 507Comp?
Yes. Both optics use the compatible RMR mounting pattern.
Can I reinstall my factory rear sight later?
Yes. No permanent slide modification is required, so the EGW mount can be removed and the original rear sight can be reinstalled.
Does this mount require fitting?
Minor fitment may be required due to manufacturing tolerances between individual firearm dovetails.
What torque should I use for the optic mounting screws?
EGW recommends 15 in-lbs for the supplied optic mounting screws.
WE RECOMMEND THIS MOUNT BE INSTALLED AND CHECKED BY A QUALIFIED AND COMPETENT GUNSMITH. Always verify dovetail fit, optic compatibility, screw length, thread engagement, mount seating, and safe firearm function before use.
Whether you carry a Kimber Micro 9 or Micro 380, this EGW dovetail mount provides a secure and reversible way to add a Trijicon RMR, SRO, Holosun 407C, 507C, or another compatible RMR-footprint optic without machining the slide.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
