Holosun K / EPS / Vortex Defender CCW-ST / DeltaPoint Pro Sight Mount for Henry H001 3/8" Dovetail
Quick Check:
Fits: Henry H001 rifles with a standard 3/8" receiver dovetail, Browning BL-22
Mount Type: Clamp-On Receiver Dovetail Mount
Material: 7075 Aluminum
Finish: Matte Black Hardcoat Anodized
Made In: USA
Product Overview
Upgrade your Henry H001 with a low-profile mounting solution designed for today's most popular micro red dot sights. This precision-machined EGW sight mount clamps directly onto the factory 3/8" dovetail located on top of the receiver.
This mount does not replace the factory rear sight and does not install into the rear sight dovetail. Instead, it securely clamps onto the 3/8" receiver dovetail, allowing you to add a red dot without drilling, tapping, or permanently modifying the firearm.
The mount supports optics utilizing the Holosun K / Shield RMSc and Leupold DeltaPoint Pro footprints. This includes popular red dots such as the Holosun EPS, Holosun EPS Carry, Vortex Defender CCW, and Vortex Defender ST.
Every mount is CNC machined in-house from premium 7075 aluminum, finished with durable matte black hardcoat anodizing, and proudly manufactured in the USA.
Technical Specifications
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodized
- Installation: Clamps onto the 3/8" dovetail on top of the receiver
- Mount Type: Clamp-On Receiver Dovetail Mount
- Permanent Modification Required: No
- Made In: USA
Compatible Firearms
- Henry H001 rifles equipped with a standard 3/8" dovetail on top of the receiver
- Browning BL-22
Important: This mount is designed for a 3/8" receiver dovetail. It is not a replacement for the firearm's factory rear sight and is not designed to install into a rear sight dovetail. Minor fitment may be required due to variations between individual firearms.
Complete Mounting Kit
- (2) 6-32 x 5/8” Button Head Screws
- (2) 6-32 x 3/8” Button Head Screws
- (2) 6-32 x 7/16” Flat Head Screws
Compatible Red Dots
This mount accepts optics utilizing the Holosun K / Shield RMSc footprint and is also compatible with optics utilizing the Leupold DeltaPoint Pro footprint. Compatible optics include:
- Holosun 407K
- Holosun 507K
- Holosun EPS
- Holosun EPS Carry
- Holosun SCS Carry
- Vortex Defender CCW
- Vortex Defender ST
- Vortex Defender XL
- Shield RMSc
- Shield RMS
- Shield SMS
- Shield SMS2
- Shield AMS
- Leupold DeltaPoint Pro
- Sig Sauer Romeo Zero
- Swampfox Sentinel
Why Choose an EGW 3/8" Dovetail Mount?
- ✔ Clamps directly onto the factory 3/8" receiver dovetail
- ✔ Does not replace the factory rear sight
- ✔ No drilling or tapping required
- ✔ No permanent modifications to your firearm
- ✔ Precision CNC machined from premium 7075 aluminum
- ✔ Hardcoat anodized for excellent wear resistance
- ✔ Low-profile red dot mounting solution
- ✔ Compatible with multiple modern optic footprints
- ✔ Proudly made in the USA
Installation
This mount clamps directly onto the 3/8" dovetail located on top of the firearm's receiver. It does not replace the factory rear sight. Before installation, confirm that the firearm is unloaded and pointed in a safe direction.
- Confirm that the firearm is completely unloaded.
- Loosen the mount's clamping hardware enough to position the mount on the 3/8" receiver dovetail.
- Place the mount in the desired position on top of the receiver.
- Make sure the mount is properly seated and aligned on the receiver dovetail.
- Tighten the clamping hardware evenly to secure the mount.
- Install the optic using the appropriate supplied mounting screws.
- Apply Blue Loctite to the mounting screws.
- Torque the optic screws according to the optic manufacturer's recommended specification.
- Verify that all mounting and clamping hardware is secure before using the firearm.
Individual receiver dovetail dimensions may vary. Minor fitment may be required to achieve proper installation.
Frequently Asked Questions
Does this mount replace the factory rear sight?
No. This mount does not replace the factory rear sight and does not install into the rear sight dovetail. It clamps onto the standard 3/8" dovetail located on top of the receiver.
Will this require drilling or tapping my rifle?
No. The mount attaches directly to the existing 3/8" receiver dovetail without drilling, tapping, or permanently modifying the firearm.
Do I need to remove the factory rear sight?
No. The mount attaches to the 3/8" dovetail on top of the receiver rather than replacing the factory rear sight.
Will this fit Holosun EPS optics?
Yes. The Holosun EPS and EPS Carry utilize the Holosun K mounting pattern and are compatible with this mount.
Will this fit the Vortex Defender?
Yes. This mount is compatible with the Vortex Defender CCW, Defender ST, and Defender XL.
Will this fit Leupold DeltaPoint Pro optics?
Yes. This mount is also compatible with optics utilizing the Leupold DeltaPoint Pro footprint.
Can fitment vary between firearms?
Yes. Manufacturing tolerances and receiver dovetail dimensions may vary between individual firearms. Minor fitment may be required.
WE RECOMMEND THIS MOUNT BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
Upgrade your Henry H001 with a secure, low-profile red dot mount that clamps directly onto the factory 3/8" receiver dovetail. Choose your compatible optic and order your EGW mount today.
Warning: This product may contain trace amounts of lead and other elements known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
