Holosun K Series (fits Vortex Defender CCW, Deltapoint Pro, JPoint, Redfield Accelerator, and Optima) Red Dot Mount For Kimber Micro 9

1 review(1) Write a Review
Ask Questions

Holosun K Series (fits Vortex Defender CCW, Deltapoint Pro, JPoint, Redfield Accelerator, and Optima) Red Dot Mount For Kimber Micro 9

$49.99
  • SKU: 49380
In Stock & Ready To Ship!
Current Stock:Only left:
Description

This Optics Mounting Plate Fits the Following Pistols:
Kimber Micro 9

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Torque Specs: 15 in/lbs

Mounting Hardware:
(2) 6-32 x 5/16 Button Head Screws - Requires 5/64 Wrench or Driver
(2) 6-32 x 3/8 Flat Head Screws - Requires 5/64 Wrench or Driver
(1) 6-32 x 3/16 Cup Point Set Screw - Requires 1/16 Wrench or Driver


Red Dot Fitment:
Bushnell RXS-100
Crimson Trace CTS-1500
Holosun 407K*
Holosun 407k-GR
Holosun 507K*
Holosun 507k-GR
Holosun EPS-GR*
Holosun EPS-RD*
Holosun EPS-Carry-GR*
Holosun EPS-Carry-RD*
Jpoint
Leupold Delta Point Pro
Optima
Redfield Accelerator
Shield RMS
Shield RMSc
Shield SMS
Sig Romeo Zero

 

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions

  1. Remove the rear sight*
  2. Install the EGW Sight Mount in the dovetail
  3. Tighten set screw (if applicable)
  4. Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  5. Apply blue Loctite to the provided mounting screws
  6. Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights

2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Click here to see a video from Vortex on how to install our red dot base on a slide.

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Frequently Bought Together:

Total: Inc. Tax
Total: Ex. Tax