EGW Hunter Howa 1500 / Weatherby Vanguard Long Action Picatinny Rail 20 MOA
Quick Check:
Fits: Howa 1500 Long Action and Weatherby Vanguard Long Action rifles
Also Fits: Smith & Wesson 1500 Long Action
Action Length: Long Action
Series: Hunter
Elevation: 20 MOA
Material: 7075-T6 Aluminum
Finish: Black Type III Hardcoat Anodized
Center Hole Spread: 4.485"
Rail Type: One-Piece Picatinny
SKU: 58122
Made In: USA
LONG ACTION VERSION
This rail is designed specifically for the Howa 1500 / Weatherby Vanguard Long Action receiver pattern. It is not interchangeable with Howa 1500 Short Action, Mini Action, or Superlite scope rails. Confirm your action length before ordering.
Product Overview
The EGW Hunter Series Howa 1500 / Weatherby Vanguard Long Action Picatinny Rail combines high-strength 7075-T6 aluminum construction with a streamlined profile developed specifically for hunting and field rifles.
Machined from solid 7075-T6 aluminum, the Hunter Series provides a strong, lightweight one-piece mounting platform without the unnecessary bulk of a traditional full-length tactical rail.
The Hunter Series uses a shorter front profile and chamfered exterior edges. The compact design reduces forward overhang, provides additional clearance around larger scope objectives, and creates a smoother profile that is less likely to snag on clothing, slings, cases, packs, or brush.
This version incorporates 20 MOA of built-in elevation, helping preserve more of your scope's internal elevation adjustment for longer-range shooting.
The rail is finished with Black Type III Hardcoat Anodizing for a durable exterior surface suited to regular field use.
Technical Specifications
- SKU: 58122
- Brands: Howa / Weatherby
- Models: Howa 1500 / Weatherby Vanguard
- Additional Fitment: Smith & Wesson 1500 Long Action
- Action Length: Long Action
- Rail Type: One-Piece Picatinny
- Series: Hunter
- Elevation: 20 MOA
- Material: Solid 7075-T6 Aluminum
- Finish: Black Type III Hardcoat Anodized
- Center Hole Spread: 4.485"
- Ambidextrous: Yes
- Ring Compatibility: Picatinny and compatible Weaver-style rings
- Made In: USA
Fits Howa 1500 & Weatherby Vanguard Long Actions
This mount is designed around the Howa 1500 Long Action receiver pattern, which is also used on corresponding Weatherby Vanguard Long Action rifles.
Designed to fit:
- Howa 1500 Long Action
- Weatherby Vanguard Long Action
- Smith & Wesson 1500 Long Action
The receiver uses a center mounting hole spread of approximately 4.485".
VERIFY YOUR ACTION LENGTH
Howa 1500 Short Action, Long Action, Mini Action, and Superlite receivers use different scope rail configurations. This mount is specifically for the standard Howa 1500 / Weatherby Vanguard Long Action receiver pattern.
What Makes the Hunter Series Different?
The EGW Hunter Series was developed for shooters who want the strength of a 7075 aluminum rail in a more streamlined package designed around a hunting rifle.
It combines 7075-T6 aluminum construction with a shorter forward profile and chamfered exterior edges to reduce unnecessary weight and bulk while retaining a strong one-piece Picatinny mounting platform.
THE HUNTER SERIES DIFFERENCE
7075-T6 Aluminum: High-strength aluminum construction in a lightweight mounting platform.
Shorter Front Profile: Reduces unnecessary forward overhang and provides additional clearance around larger scope objectives.
Chamfered Edges: Creates a smoother profile that is less likely to catch on clothing, cases, slings, packs, or brush.
Type III Hardcoat: Provides a durable exterior surface for regular field use.
7075-T6 Aluminum Construction
The Hunter Series rail is machined from solid 7075-T6 aluminum.
7075-T6 provides greater strength than the 6061 aluminum used in EGW Standard Duty rails while maintaining the low weight that makes aluminum well suited to hunting rifles.
For hunters and long-range shooters who want a strong one-piece mounting platform without moving to a heavier steel rail, the Hunter Series provides an excellent balance.
Why Choose 20 MOA?
A 20 MOA rail incorporates forward cant into the optic mounting surface.
This positions the scope so more of its internal elevation adjustment remains available for dialing upward at extended distances.
For shooters using cartridges commonly found in Howa 1500 and Weatherby Vanguard Long Action rifles, the additional elevation available with a 20 MOA base can be especially useful when stretching the rifle beyond typical hunting distances.
0 MOA VS. 20 MOA
0 MOA: Neutral mounting surface. A straightforward choice for typical hunting distances and general-purpose shooting.
20 MOA: Adds forward cant to preserve more of the scope's elevation adjustment for extended-range dialing.
Shorter, Cleaner Hunting Profile
Traditional full-length tactical rails can extend farther forward than necessary for many hunting scope configurations.
The Hunter Series reduces the front portion of the rail while retaining the Picatinny slots needed for normal scope ring positioning.
The reduced front profile also provides additional room beneath larger objective bells, which can help when setting up a scope as low over the rifle as the optic and ring combination allows.
Chamfered Edges for Field Use
The Hunter Series uses chamfered and beveled exterior edges rather than the squared profile commonly found on traditional tactical rails.
Removing unnecessary sharp edges creates a cleaner profile and helps reduce snagging when the rifle is carried on a sling, moved through brush, or placed into a soft case, scabbard, or pack.
Black Type III Hardcoat Anodized
After machining, the rail receives a Black Type III Hardcoat Anodized finish.
The hardcoat process increases surface hardness while providing the matte-black exterior expected on a modern hunting or precision rifle.
One-Piece Picatinny Mounting Platform
The one-piece Picatinny design provides multiple positions for scope ring placement.
That flexibility makes it easier to establish proper eye relief and ring spacing than with traditional fixed-position two-piece scope bases.
The rail is compatible with Picatinny scope rings and compatible Weaver-style rings.
Why Choose the EGW Hunter Series 20 MOA Rail?
- ✔ Fits Howa 1500 Long Action rifles
- ✔ Fits Weatherby Vanguard Long Action rifles
- ✔ Fits Smith & Wesson 1500 Long Action rifles
- ✔ 4.485" center mounting hole spread
- ✔ 20 MOA of built-in elevation
- ✔ Machined from solid 7075-T6 aluminum
- ✔ Black Type III Hardcoat Anodized finish
- ✔ Shorter front profile
- ✔ Chamfered edges help reduce snagging
- ✔ Lightweight hunting-oriented design
- ✔ One-piece Picatinny mounting platform
- ✔ Flexible scope ring positioning
- ✔ Ambidextrous design
- ✔ Made in the USA
Installation & Fitment
Before ordering, confirm that your rifle uses the Howa 1500 / Weatherby Vanguard Long Action receiver pattern.
The receiver's center hole spread should measure approximately 4.485".
Clean the receiver and mounting hardware before installation and verify that the rail sits completely flush against the receiver before tightening the screws.
EGW recommends tightening the mounting screws to 20 in-lbs with a small amount of blue threadlocker.
Minor fitment may be required due to manufacturing tolerances.
CHECK YOUR RECEIVER BEFORE ORDERING
Howa 1500 Short Action, Long Action, Mini Action, and Superlite receivers use different rail configurations. This mount is specifically designed for the Howa 1500 / Weatherby Vanguard Long Action receiver pattern.
Frequently Asked Questions
Will this fit a Howa 1500 Long Action?
Yes. This rail is designed for the standard Howa 1500 Long Action receiver.
Will this fit a Weatherby Vanguard Long Action?
Yes. The corresponding Weatherby Vanguard Long Action uses the compatible receiver mounting pattern.
Will this fit a Smith & Wesson 1500 Long Action?
Yes. The Smith & Wesson 1500 Long Action uses the compatible receiver pattern.
Will this fit a Howa 1500 Short Action?
No. Short Action and Long Action receivers require different scope rails.
Will this fit a Howa Mini Action?
No. The Mini Action uses a different receiver and mounting pattern.
What is the mounting hole spread?
The center spread is approximately 4.485".
What is the Hunter rail made from?
It is machined from solid 7075-T6 aluminum.
What makes the Hunter Series different?
The Hunter Series combines 7075-T6 aluminum construction with a shorter front profile and chamfered edges for a lightweight, streamlined mounting system designed around hunting rifles.
What does 20 MOA do?
The rail adds forward cant to preserve more of your scope's internal elevation adjustment for longer-range dialing.
Should I choose 0 MOA or 20 MOA?
Choose 0 MOA for a neutral mounting surface suited to most general hunting applications. Choose 20 MOA when additional elevation adjustment is useful for extended-range shooting.
What scope rings can I use?
The rail is designed for Picatinny scope rings and is also compatible with many Weaver-style rings.
7075 Hunter Construction with 20 MOA for Your Howa Long Action
The EGW Hunter Series gives Howa 1500 and Weatherby Vanguard Long Action owners a strong 7075-T6 aluminum Picatinny rail with a streamlined hunting profile and 20 MOA of built-in elevation for extended-range shooting.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
