EGW Commander Reverse Plug, Keyed, 1/4" Hole

Product Overview

The EGW Commander Reverse Plug with 1/4" Hole is designed for Commander-length 1911 pistols using bull barrels, compensated configurations, or other recoil systems that do not use a traditional barrel bushing to retain the recoil spring.

EGW reverse plugs are machined from carbon steel rather than a soft lead-based alloy. This provides a stronger component designed to resist cracking and deformation during repeated recoil cycles.

The plug features an extended rounded shoulder for additional support. By extending the supported area, the design helps eliminate exposed sections where stress can concentrate and cracks can begin.

This version uses a keyed configuration with a 1/4" hole and is intended specifically for Commander-length slides.

What Does a Reverse Plug Do?

A traditional 1911 recoil system uses a barrel bushing and recoil spring plug at the front of the slide. Bull-barrel and compensated pistols often eliminate the traditional barrel bushing, which requires a different method of retaining and supporting the recoil spring.

A reverse plug installs from the rear side of the slide's spring tunnel and provides the forward support point for the recoil spring and guide rod system.

This EGW reverse plug is designed specifically for that style of recoil system in a Commander-length 1911 slide.

Designed for Bull-Barrel & Compensated 1911s

Bull-barrel 1911s and compensated pistols commonly use reverse-plug recoil systems because there is no conventional barrel bushing at the front of the slide to retain the recoil spring.

The EGW Commander Reverse Plug provides the support needed for this type of recoil assembly while maintaining a compact configuration appropriate for Commander-length slides.

Carbon Steel Construction

EGW manufactures this reverse plug from carbon steel for strength and durability under repeated recoil cycles.

The reverse plug is a load-bearing component in the recoil system. Every time the pistol cycles, the plug supports recoil spring compression. Using a durable steel component helps provide the strength needed for long-term service.

Extended Rounded Shoulder for Added Support

The shoulder of the EGW reverse plug is extended and rounded to increase the supported area of the component.

This design reduces exposed unsupported sections where stress can concentrate, helping address one of the areas where weaker reverse plugs may crack during use.

Why Choose the EGW Commander Reverse Plug?

• ✔ Designed specifically for Commander-length 1911 slides
• ✔ Intended for bull-barrel and compensated pistols
• ✔ Keyed configuration
• ✔ 1/4" hole
• ✔ Machined from carbon steel
• ✔ Extended rounded shoulder for additional support
• ✔ Designed to resist cracking and deformation
• ✔ Purpose-built for reverse-plug recoil systems
• ✔ Manufactured by Evolution Gun Works

Installation & Fitment

This reverse plug is intended for professional 1911 fitting and installation. Reverse-plug fit depends on the slide, spring tunnel, guide rod system, barrel configuration, and other recoil-system dimensions.

The plug must seat correctly in the slide and provide proper clearance for the guide rod and recoil spring throughout the complete range of slide movement.

Due to differences between individual slides and custom 1911 builds, minor fitting may be required.

Frequently Asked Questions

What slide length is this reverse plug for?
This plug is designed for Commander-length 1911 slides.

What size hole does this reverse plug have?
This version has a 1/4" hole.

Is this reverse plug keyed?
Yes. SKU 12078 uses a keyed reverse-plug design.

What is the reverse plug made from?
It is manufactured from carbon steel.

When is a reverse plug used?
Reverse plugs are commonly used in bull-barrel and compensated 1911 pistols where a traditional barrel bushing is not used to retain the recoil spring.

Will this fit a Government-length 1911?
This product is specifically designed for Commander-length slides. Use the reverse plug designed for your exact slide and recoil-system configuration.

Will this fit a standard bushing-barrel Commander?
This reverse plug is intended for recoil systems that use a reverse plug rather than a traditional barrel bushing and recoil spring plug. Verify your pistol's recoil-system configuration before ordering.

Does this require fitting?
Minor fitting may be required because slide, spring tunnel, and recoil-system dimensions can vary between manufacturers and custom builds.