HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTER FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
HK VP9 Optics Ready Plate #5 | Fits Vortex Venom, Viper, Burris FastFire & Docter
Quick Check: HK VP9 OR Plate #5 Equivalent.
Fits: HK VP9 Optics Ready Models
Footprint: Docter / Vortex / Burris FastFire
Comparable To: HK VP9 Optics Ready Plate #5
Material: 7075 Aluminum
The EGW red dot sight mount adapter plate for HK VP9 Optics Ready models installs directly into the factory optics cut, allowing you to mount red dots using the Docter / Vortex / Burris FastFire footprint.
Simply remove the factory plate cover and replace it with the EGW mount to install optics like the Vortex Venom (Open Emitter), Vortex Viper, Burris FastFire, Viridian RFX25, and other compatible red dots.
This mount is compatible with HK VP9 Optics Ready, HK VP9L Optics Ready, HK VP9 Tactical Optics Ready, and other VP9 optics-ready models using the same factory slide cut.
Comparable to the HK VP9 Optics Ready Plate #5, this mount provides a strong, low-profile mounting solution machined from American-made 7075 aluminum and finished in matte black hardcoat anodizing.
Learn more about optic footprints: RMR vs Docter vs RMSc Footprints Guide
Technical Specifications
- Mount Type: HK VP9 Optics Ready Adapter Plate
- Comparable To: HK VP9 Optics Ready Plate #5
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.811"
- Overall Width: .99"
- Red Dot Torque: 15 in/lbs
- HK Recommended Plate Torque: 2Nm / 17.7 in/lbs
- Made in USA
Compatible Pistols
- HK VP9 Optics Ready
- HK VP9L Optics Ready
- HK VP9 Tactical Optics Ready
- Other HK VP9 Optics Ready Models
Compatible Red Dots
- Viridian RFX25
- Vortex Viper
- Vortex Venom (Open Emitter)
- Burris FastFire 1
- Burris FastFire 2
- Burris FastFire 3
- Burris FastFire 4
- Docter
- ADE RD3-001
- ADE RD3-002
- ADE RD3-009
- UTG Reflex Micro Dot
- Crimson Trace CTS-1200
- Crimson Trace CTS-1300
- Sightmark Mini Shot
- Cuda RX-795
Mounting Hardware Included
- (2) 6-32 x 3/8" Flat Head Screws
- (2) 6-32 x 5/16" Button Head Screws
Optional Replacement Slide Screws
- M4 x 0.7 x 8mm Long Torx Plus Screws available for an additional charge
Why Choose This HK VP9 Optics Ready Plate?
- ✔ Direct fit for HK VP9 Optics Ready models
- ✔ Comparable to HK VP9 Plate #5
- ✔ Expands compatibility to Docter footprint optics
- ✔ Low-profile mounting solution
- ✔ Precision machined from 7075 aluminum
- ✔ Made in the USA by EGW
Installation Notes
- Remove the factory rear cover plate
- Install the EGW sight mount into the factory optics cut
- The factory plate mounting screws may be reused
- HK recommends replacing plate mounting screws after 2,000 rounds
- Torque plate mounting screws to 2Nm / 17.7 in/lbs
- Place the red dot sight onto the mount
- Apply blue Loctite to the optic screws
- Torque optic mounting screws to 15 in/lbs
Important Fitment Information
This mount fits HK VP9 Optics Ready models only and is comparable to the HK VP9 Optics Ready Plate #5. Verify your pistol uses the factory optics-ready slide cut before ordering.
Warning: This product may contain trace amounts of lead. For more information, visit www.P65Warnings.ca.gov.
