Mounting Hardware is Included
This mount fits:
- Shadow 2 Compact Optics Ready
- Shadow 2 Optics Ready
This mount does not fit:
- Shadow 2 (Not Optics Ready)
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Installation Instructions
- Install the EGW Sight Mount
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Click here to see a video from Vortex on how to install our red dot base on a slide.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Alt Description:
- CZ Shadow 2 Red Dot Mount
- CZ shadow 2 optic mount
- CZ shadow 2 holosun
- CZ shadow 2 sro
- CZ shadow 2 rmr plate
- CZ shadow 2 rmr
- CZ shadow 2 optic mount
- CZ shadow 2 dovetail optic mount
- shadow 2 sro
- CZ shadow 2 holosun plate
- CZ shadow 2 trijicon sro
- CZ 75 rmr mount
- Shadow 2 optic mount
- CZ 75 dovetail mount
- CZ shadow 2 dovetail mount
