6" Wilson/Nowlin Barrel Ramp Cutter
70700
$75.00
This is an M42 cobalt cutter used to cut frames for Wilson or Nowlin-style barrels. It can also be used to clean up the vertical impact surface on a non-ramped barrel 45.
Warning: This product may...
Carbide Cutter 0 Degree
70710
$50.00
SpecificationsThickness: 0.0625"Inner Diameter: 0.500"
These cutters are for use with our Slitting Saw Mandrils, in conjunction with our gunsmith plate.
The tool is domestically produced and made...
Carbide Cutter 15 Degree
70711
$54.00
These cutters are for use with our Slitting Saw Mandrils, in conjunction with our gunsmith plate.
The tool is domestically produced and made from micrograin carbide which gives long life and...
Carbide Cutters 60 Degree
70712
$67.00
These cutters are for use with our Slitting Saw Mandrils, in conjunction with our gunsmith plate.
The tool is domestically produced and made from micrograin carbide which gives long life and...
Double End Carb Dove Cutter .33 x 60 65
70720
$85.00
This tool is machined from solid carbide with a 3/8" shank. The cutters are .330" with one end at 60 degrees and the other at 65 degrees.
This will not cut a Novak rear sight. It is only appropriate...
Barrel Bed Cutter
70740
$50.00
Use our barrel bed cutter to lower the barrel bed to give proper clearance between the barrel and the inside of the slide. This tool is made from micrograin carbide with a 5/8" (.625") diameter shank...
