HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTER FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
Browning Hi-Power Red Dot Mount – Fits Vortex Venom (Open Emitter), Viper, Burris FastFire, Docter Footprint
Quick Check: Confirm Your Dovetail Dimensions.
✅ Fits: Browning Hi-Power.
Mounting Hardware Included: Yes.
Compatibility: Fits Docter / FastFire / Viper / Venom footprint optics.
Important: This is a press fit mount. Utilization of a sight pusher tool may be required.
Dovetail Note: This insert is designed to fit dovetails with a bottom width of .275". If the bottom of your dovetail is significantly wider than .275", this insert will not be compatible.
Does NOT Fit: Springfield SA-35 or Girsan MCP35.
Installation & Overview
Upgrade your Browning Hi-Power with a durable and precise red dot mounting solution without permanent slide milling. This EGW mount is engineered to provide a secure interface for Docter footprint optics on the Browning Hi-Power platform.
Compatible with optics like the Vortex Venom (Open Emitter), Vortex Viper, Burris FastFire series, and other Docter pattern red dots, this mount delivers a stable platform for improved target acquisition and practical shooting performance.
Machined from 7075 aluminum and finished in matte black hardcoat, this press fit mount is built for strength, low weight, and long-term reliability. Because Hi-Power dovetails can vary, carefully measuring the bottom width of your dovetail before ordering is strongly recommended.
Learn more about optic footprints: RMR vs Docter vs RMSc Footprints Guide
Technical Specifications
- Mount Type: Red Dot Mount Plate
- Machined From: 7075 Aluminum
- Finish: Matte Black Hardcoat
- Overall Length: 1.811"
- Overall Width: .99"
- Fits Footprint: Docter / FastFire / Viper / Venom
- Mounting Method: Press Fit Dovetail Insert
- Torque Specs: 15 in/lbs
- Made in: USA
Compatible Firearm
This Mount Does Not Fit
- Springfield SA-35
- Girsan MCP35
Compatible Red Dots
- Viridian RFX25
- Vortex Viper
- Vortex Venom (Open Emitter)
- Burris FastFire 1
- Burris FastFire 2
- Burris FastFire 3
- Burris FastFire 4
- Docter
- ADE RD3-001
- ADE RD3-002
- ADE RD3-009
- UTG Reflex Micro Dot
- Crimson Trace CTS-1200
- Crimson Trace CTS-1300
- Sightmark Mini Shot
- Cuda RX-795
Why Choose This EGW Mount?
- ✔ Designed specifically for the Browning Hi-Power
- ✔ Strong press fit mounting system
- ✔ Machined from solid 7075 aluminum
- ✔ Maintains secure zero under recoil
- ✔ Compatible with popular Docter footprint optics
- ✔ Made in the USA
Mounting Hardware Included
- (2) 6-32 x 5/16" Button Head Screws
- (2) 6-32 x 5/16" Flat Head Screws
- (1) BHP (49561-I) Dovetail Insert
- (2) 6-32 x 3/8" Flat Head Screws
Installation Notes
- Measure the bottom width of your dovetail before installation
- Install the BHP dovetail insert using a sight pusher if needed
- Install the EGW sight mount
- Place the optic on the mount
- Apply blue Loctite to the mounting screws
- Torque screws to 15 in/lbs
Fitment Warning
This mount is designed for the Browning Hi-Power only. It will not fit the Springfield SA-35 or Girsan MCP35. Measure your dovetail carefully before ordering. If the bottom width of your dovetail is significantly wider than .275", this insert will not be compatible.
Warning: Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product may contain trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, visit www.P65Warnings.ca.gov.
